Deutsch 
English 
Polska 
Nederlands 
Français 
Español 
Peddinghaus FDB 600 Plate Processor
Used Peddinghaus FDB 600 Plate Processor - cutting and drilling systems are reliable top performers in sheet metal processing
Even though many Peddinghaus FDB 600 cutting and drilling lines have become a little elderly, these sheet metal working machines still make a reliable contribution to steel construction and steel trading.
By the 1980s, these Peddinghaus plate processors (burning and drill lines) were an innovation in economical flat steel processing, making it possible to carry out both the drilling and the burning of flat steel in a single machine.
Also in 2018, this oxy-fuel cutting machine with integrated drilling unit for the economical steel construction of head plates, base plates, splice plates, end plates, flanges, gussed plates, web stiffeners etc. is a reliable production machine.
A stable construction, a good care by the machine operator and a good service by Peddinghaus as the machine manufacturer and the company Nenok from Cologne as one of the leading suppliers of used machines in steel construction ensure the further cost-effective use for sheet metal processing. The good supply of spare parts and service for the FDB 600 series (be it for mechanical components or electrical components such as the Siemens CNC control, Siemens drives or Baumüller drives) also guarantees steel construction and steel trading companies a high level of availability for this Plate processor - burn drill system.
Function Peddinghaus FDB 600 Plate Processor
The operating principle of the FDB 600 Plate processor is simple and reliable. After programming a component dimension on the CAD system (top plate, base plate, gussed plate, flange, etc.) with the required holes, the NC data generated by the programming software in DSTV or DXF format is transferred to the Siemens CNC control of the machine. (usually Siemens CNC after retrofit sometimes Fagor CNC).
The flat material (at least 50 mm wide and a maximum of 600 mm wide) is then laid down on the inclined inflow roller table (usually 6 m long) and brought to the belt tensioner of the roller measuring feed.
After the material is clamped in the feed unit, it is precisely positioned via a measuring disk and the zero point. Thereafter, the previously programmed positions are drilled with an HSS oil feed drill (cooling channel drill) in the diameter range of 8 mm to 40 mm, or provided with a marking (short drilling to obtain a point in the sheet metal).
Subsequently, the flat steel with the transport rollers is further transported to the gas-oxygen burning unit. The contour data previously generated in the Siemens control system is then burned out with an autogenous burner (usually oxygen with propane gas or acetylene gas). The finished drilled and burned component can now be removed from the slidable, sloping output roller conveyor. The deburring of the bores and cutting edges is usually carried out by the machine operator next to the machine while the machine is already producing the next component
Nenok regularly has several of these reliable used Peddinghaus FDB 600 Plate Processor machines available.
We also gladly help you with the service or spare parts procurement for your existing Peddinghaus FDB 600 plate processing machines.
