Gietart SPRINT 2.6
Description of Gietart SPRINT 2.6
The Gietart blast machine type Gietart Sprint 2.6 is suitable for blasting and cleaning sheet metal, profiles and pipes in steel construction, plant engineering and steel trade.
This continuous blast machine was built in 2007 and has only worked approx. 8200 hours in blast mode. The operating hours amount to 12,300 hours. The Gietart Sprint 2.6 continuous sandblasting machine is suitable for blasting sheets and profiles with a maximum width of 2550 mm and a maximum feed-through opening of 650 mm.
The special roller distance from roller to roller is reduced to 400 mm, so that components with a minimum length of 1500 mm can also be transported through the blasting chamber. Even smaller blast parts can run through the system in a blast basket.
The roller conveyor blast machine is equipped with 6 powerful C380 blast turbines with 11 kW drive power each.
The high turbine power guarantees a SA 2.5 blast quality. The throughput speed with rapid traverse is adjustable from 0.6 -10 m/min.
The total connected load of the continuous blast machine is approx. 120 kW.
The filter system of the blasting unit has an integrated cartridge filter consisting of 16 individual cartridges. The outlet of the blasting chamber is equipped with a fully automatic brush and blow-off system, therefore the workpieces are transported out of the system free of abrasive. The abrasive return system consists of transport screws and a bucket elevator tower. The upper head of the bucket elevator is designed with a cascade sifter for cleaning the abrasive and separating the fine dust.
The machine also includes a driven Gietart transport system with infeed and outfeed roller conveyor (6 metres inlet and 6 metres outlet). This is driven by the blast machine to ensure synchronisation between the transport system and the blast cabinet. The roller conveyor height is 865 mm. Further roller conveyors can be offered by Nenok.
The machine is in good condition. Nenok is also happy to offer support with loading, assembly and commissioning by trained specialist personnel.
The manufacturing company Gietart from Hengelo in Holland is one of the leading blast machine manufacturers and has been part of the Kaltenbach Group from Lörrach for several years. A very good supply of spare parts and efficient service is guaranteed.
The transport dimensions are: 8.5 m x 3.4 m x 3.2 m for the main machine incl. blasting chamber. Please refer to the layout for the installation dimensions.
- : 2550 mm
- : 650 mm
- : 6 Stck.
- : 120 kW
- : 27 t
- : 6000 mm
- : 6000 mm
- : 419 mm
- : 20 m³/h
How does the machine get to you?
Are you concerned about the disassembly and loading, finding the right forwarder, customs clearance or shipping abroad? We have been familiar with the procedures for decades and know what to do.
We are happy to take care of the entire process so that the machine finds its way to you safely and quickly - at a fair price.