
Behringer HBP 310-523GA
Description of Behringer HBP 310-523GA
The Behringer HBP310 523 GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry.
Thanks to its sturdy frame, precise double-column guide and powerful drive unit, the HBP310 523 GA ensures high cutting performance with consistent results. The saw has an automatic saw angle adjustment.
Another feature of the Behringer HBP310 523 GA is the user-friendly control system, which enables even less experienced operators to use the machine efficiently. The automatic material feed helps to increase productivity as it optimizes material transport during the cutting process. The machine is also equipped with modern safety features to ensure safe operation.
The durable design and precise cutting guidance make the Behringer HBP310 523 GA a reliable solution for demanding cutting tasks.
Automatic length measurement
A material feed device with gripper and length measuring device and a maximum one-stroke travel of 3000 mm is used to automatically transport, position and measure the profiles.
- The clamping pressure is infinitely adjustable. The material remains hydraulically clamped during cutting.
- Switch-off device for the automatic sequence when the end of the bar is reached
- Travel speed to the machine approx. 12 m/min (back approx. 20 m/min)
- Total length 3100 mm with driven rollers
- Roller spacing 6 x 500 mm, covering width 550 mm
Chip disposal
Chips are transported from the machine bed to the side with a chip conveyor.
Material clamping vise in the saw
Profiles are clamped in the saw using a hydraulic horizontal and vertical clamping device. The pressure is adjustable.
Cooling device
The saw band is cooled and lubricated at the same time by means of a micro-spraying device. The cooling medium to be used can be obtained from Nenok.
BEHRINGER computer control
A state-of-the-art industrial PC in a compact design for flexible operation in conjunction with a PLC control system ensures safe automatic operation.
- IP 65 version with extended temperature range up to 45°C ambient temperature and increased shock resistance
- Industrial processor Celeron M 600 MHz
- Memory 512 MB DDR RAM
- Display Flat display with 15 inch and 1024 x 768 resolution
- AMT touchscreen with touch pen
- Industrial hard disk ≥ 40 GB
- Keyboard Membrane keyboard integrated in front panel
- Operating system MS Windows XP Multilanguage
- Connections 1 x USB 2.0, accessible from the front with protective cap
- Semi-automatic cycle (pos. 12)
- Extended control for an automated workflow consisting of: Clamping, rapid feed, sawing, unclamping and saw frame lifting.
- Integrated remote maintenance module
Menu-guided operation with
- stored parameters
- Preselection of the number of pieces
- Display of the number of pieces sawn
- Error messages, operating hours, cutting times, belt service life, etc.
A total of 10 jobs (orders) can be entered.
Transport system and additional functions
The material feed from the infeed roller conveyor (9 m) into the machine is controlled manually until the first cut is made. Automatic operation can be started during the cutting process.
The material is transported from right to left. On the outfeed side, material is removed for small profiles by means of a swivel-mounted stop, which removes the parts to the side.
After being transported on the driven roller conveyor, longer profiles are pushed sideways onto the material store, which consists of 7 metal supports, via a push-off device.
At the end of the roller conveyor, a switching threshold ensures that the material is not transported beyond the roller conveyor.
On the infeed side in front of the saw, the material is lifted by a hydraulic lifting roller for transportation over the saw table.
- Push-off device for long profiles up to 9 m in length on the outfeed side
- Lateral material removal via manually operated push-off bracket for small parts directly after the saw
- Bar start detection by means of light barrier for automatic start with or without a cut
Working areas of the saw
Mitre left
- 75° round 310 mm, flat W x H = 520 x 310 mm
- 60° round 310 mm, flat W x H = 450 x 310 mm
- 45° round 310 mm, flat W x H = 350 x 310 mm
- 30° round 230 mm, flat W x H = 230 x 310 mm
Mitre right
- 75° round 310 mm, flat W x H = 500 x 310 mm
- 60° round 310 mm, flat W x H = 420 x 310 mm
- 45° round 270 mm, flat W x H = 270 x 310 mm
Minimum round: 20 mm
Maximum material length: 10 m
Minimum cut-off length:
- Manual operation from 10 mm
- Automatic operation from 25 mm
- Minimum remaining piece length 190 mm
Max. Material weight: 4000 kg
Motorized adjustment of the cutting angle using a positioning control. Input and digital display on the terminal with 0.1 degree accuracy.
Technical data saw
- Saw blade dimensions: 5000 x 34 x 1.1 mm
- Cutting speed continuously adjustable 20 - 140 m/min
- Saw blade feed adjustable 0 - 300 mm/min
- Saw motor power 4 kW, frequency-controlled
- Chip brush
- Dimensions: L/W/H: 6,000 mm/ 2,800 mm / 2,300 mm
- Total weight: approx. 3,000 kg
- Total drive power: approx. 8 kW
- Material support height: 800 mm
- Micro-dosing device for saw band lubrication and cooling
- Laser line for visualizing the saw cut
Electrical characteristics
- Operating voltage 400 V
- Control voltage 24 V - DC
- Rated current 28 A
- Back-up fuse 35 A
- Power 13 kW
- Frequency 50 HZ
- Protection class IP 22
More information about this machine model:
HBP310-523GA
Are you concerned about the disassembly and loading, finding the right forwarder, customs clearance or shipping abroad? We have been familiar with the procedures for decades and know what to do.
We are happy to take care of the entire process so that the machine finds its way to you safely and quickly - at a fair price.