Ficep RAPID HP35T

Ficep RAPID HP 35 T angle processing machine

The Ficep HP35T is the predecessor model of the current Ficep RAPID series for angle steel processing

The Ficep HP35T is a CNC-controlled system for processing angle profiles. These are high-performance angle processing centers which are often used in lattice tower construction. The angle steel is placed on a conveyor frame for material loading. A measuring carriage with gripper automatically conveys the angle material to the individual processing stations of the system according to the processing data entered on the CNC control. Once the machining process has been completed, the finished drilled, marked and sawn component is taken over by the outfeed roller conveyor and the depositing system.

Conveyor system

Reinforced roller conveyor for profiles up to a length of 12 m. A measuring carriage with drive is located on the feed table and conveys the material at a maximum transport speed of up to 45 m/min. A rotary support system with cross transport racks in the infeed area ensures the infeed of previously stored profiles in the waiting position.
In the outfeed area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 m. A cross transport area with 5 supports is used for depositing.

Drilling units with tool changer

In order to be able to process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine has 2 high-performance drilling units (one unit per flange) with a drilling spindle drive of 19 kW power and a continuously adjustable spindle speed of 180 - 3500 revolutions per minute. This drilling performance is ideal for the use of modern carbide drilling tools. The drilling tools are clamped in HSK-A80 holders and a tool changer with 3 tool positions ensures fast tool changes on each drilling unit.

MKT38N marking unit

A marking unit with 38 marking tools enables the marking of an angle profile flange.
Characters with a size of 16x8 mm are pressed in hydraulically and enable the subsequent assignment of the components after galvanizing.

High-performance circular saw

The high-performance circular saw is designed for 90° saw cuts. A vertical clamping system ensures that the material is clamped during the fast saw cut. The material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw drive with a 560 mm circular saw blade ensures a very high cutting performance. The cutting speed is 80 - 180 m/min

Technical data Ficep HP35T:

• Angle dimensions min. 60x60x6 mm to 350x350x40 mm
• Circular saw blade diameter 560 mm
• Saw motor 18 kW
• Cutting speed 80 - 180 m/min
• Drilling diameter max. 40 mm
• Drill spindle drive: 19 kW
• Spindle speed 180 - 3500 rpm
• Feed speed 80 - 300 mm/min