Kaltenbach KBS 620 DG

The Kaltenbach KBS 620 DG semi-automatic mitre band sawing machine is a modern sawing machine for steel construction profiles, such as horizontal double-T beams, steel L and steel U profiles as well as square tubes.

A comprehensive Kaltenbach T13 transport system is part of the band sawing machine and is composed of a 14,5 m long infeed roller conveyor and a 12 m long outfeed roller conveyor.

An additional 18.5 m long parallel roller conveyor system is installed on the infeed side, which transports the material onto the saw roller conveyor with 5 cross transfer tables as a chain conveyor system.

On the outfeed side, the material can be conveyed from the outfeed roller conveyor after the sawing process via a further 5 chain cross conveyor. The Kaltenbach T13 transport system is operated via the control panel.

A motorised adjustable length stop Kaltenbach LS 270 with NC control is used for material measurement. The measuring length is designed for max. 10.000 mm. The length stop consists of a measuring stop with a wide stop plate that can be raised and lowered. A pneumatically extendable adapter enables the measurement of short material cuts.

The profile clamping in the KBS 620 DG bandsaw is carried out via a horizontal and a vertical clamp. The large mitre adjustment of the NC-controlled double mitre bandsaw ranges from + 30° to - 70°.

To be able to help the machine user quickly in the case of a malfunction, there is the option of remote diagnosis via an analogue telephone line.

Extract from the inclusive special equipment of this KBS 620 DG mitre band sawing machine:

• Chip conveyor
• Cutter monitoring system to control a blunting saw blade 
• Laser for displaying the cutting edge
• Heating device for control panel and control cabinet (for temperatures below 5 °C)

This band saw installation is in very good condition and can be inspected upon agreement. Professional disassembly, relocation and assembly at a new location can be offered as an option by Nenok.