Gietart Sprint 1504

The Kaltenbach Gietart Sprint 1504 blast machine is designed as a continuous blast machine for the economical blasting of sheet metal and profiles in steel construction and the steel trade.

Due to a name change, this Sprint 1504 blast machine is now offered again under the company name Gietart.

The modern and reliable Kaltenbach Sprint 1504 was manufactured at Gietart's sister company in Hengelo. The blast machine is equipped with 4 C380 blast turbines with 11kW each. The Sprint 1504 continuous sandblasting machine is suitable for blasting sheet metal and profiles with a maximum cover width of 1510 mm and a maximum workpiece height of 430 mm; small parts can be processed with a blasting basket.
The machine is also equipped with an efficient filter system and a fully automatic brush and blow-off system.
For material transport, the machine has a transport system with a driven infeed roller conveyor and outfeed roller conveyor, which is elevated in this blasting machine due to the above-floor design.

The blasting system is in good condition and has approx. 13,831 blasting hours and approx. 19,939 operating hours.

The continuous blasting system will be professionally dismantled by Nenok technicians. Nenok will be happy to offer you transportation to a new location and installation of the Kaltenbach Gietart Sprint 1504 blast machine. This continuous blasting system does not require a foundation pit and can therefore be installed above ground. Installation in a foundation pit is of course also possible. A layout plan is available on request.

The reliable Kaltenbach Sprint continuous blast machines are manufactured by Gietart in Hengelo, the Netherlands. Machine service, original wear parts and spare parts procurement are carried out by the Kaltenbach Group with its worldwide subsidiaries.

After replacing some wear parts and the filter cartridges, the blasting machine is in very good condition again.

Technical data Kaltenbach Gietart Sprint 1504

• Brushing and blowing unit: 1 piece
• Passage width: 1550 mm
• Passage height: 430 mm
• Sheet thickness min: 6 mm
• Flat material min: 60 x 80 mm
• Number of turbines: 4 pcs.
• Turbine power: 11 kW
• Working speed: 0.8 - 1.5 m/min.
• Throughput speed: 0.6 - 10 m/min
• Height: 5293 mm
• Supplied with manufacturer's declaration