A high-quality Intec paint dryer including chain conveyor and pallet truck system for the transverse transport of sheet metal and steel profiles are for sale due to a closing of a steel construction works shop. Take the chance!
For fast and quality drying of the coated workpieces, this cost-effective used paint drying system (year of construction 2012) is suitable. The necessary transport system (built in 1994) consisting of chain conveyors with a usable width of 2500 mm and a suitable lift truck system with special lifting arms complete this special offer. Since the coating area is subject to a particular pressure of time in steel processing and trading, a suitable drying of the painted profiles and sheets is always an important cost factor. 4 modern Weishaupt gas burners with an output of 50 kW each provide the necessary heat output. The dryer is designed for operation with natural gas. The usable width of the drying plant is 2500 mm for sheet metal and 1800 mm for profiles. The chain conveyor, which consists of 3 segments (infeed, dry area and outfeed), transports the coated material during the drying process through the drying tunnel ventilated by hot air. So that the sheets and profiles come into contact with the smallest possible contact surface, each 3 web / rib is increased. This means that both short and long components can travel optimally through the system. The recirculating air volume of the Intec Paint Dryer is 46000 m³ / h and the exhaust air volume is 4000 m³ / h. For further questions please contact Nenok