Mubea Matic L15 F20 1P(3)-S
This used machine is already sold. You are interested in this type of machine? Please send us your inquiry! We will get in touch with you as soon as a similar model is available.
Description of Mubea Matic L15 F20 1P(3)-S
Mubea (Muhr und Bender) Punching and shearing machine suitable for shearing and punching flat steel and angle profiles. This low cost Mubea punching shear system can still be seen in operation. The infeed roller conveyor has a length of 12.5 m.
The MUBEA-MATIC punching shear system consists of an angle steel and flat steel shear HS 1800 with a maximum shearing force of 180 tons. The capacity of the angle shear is 150 x 150 x 15 mm or 200 x 200 x 14 mm maximum and 200 x 15 mm flat steel. The hydraulic shear is equipped with a quick-change blade for angle steel and a flat steel blade as well as a hydraulic hold-down device.
The VP 600/510 punching unit has a punching capacity of up to 50 mm diameter in 10 mm sheet thickness with a tensile strength of 450N per qmm.
The positioning carriage of the angle punch runs on ball bearing V-rollers and is driven into position by a three-phase servo motor via gear and drive pinion. The gripper attached to the measuring carriage is designed for material fixing.
The hydraulic punch MUBEA VP 600/510 is aligned with a 3 punch tool and a hydraulic hold down unit.
- : 12500 mm
- : 180 t
- : 600 kN