Ficep Tipo G25 LG

FICEP Tipo G25 LG sheet metal processing center is suitable for economical processing of steel sheet and flat steel in steel construction, steel trade and plant engineering.

Ficep Tipo G series

The Ficep Tipo G series consists of a rigid double bridge structure in which the powerful drilling spindle is stably guided. The welded bridge frame, with its particular structural rigidity, is ideally designed for machining tasks such as carbide drilling, marking with numbers and letters, milling and plasma cutting.

Ficep Tipo G25 LG Performance

The young used Ficep Tipo G25 LG is capable of drilling, center punching, tapping, countersinking, marking, milling and plasma cutting flat steel or sheet metal plates with a max. plate width of 2500 mm and a max. plate length of 6000 mm in one clamping. This CNC controlled flat steel processing center is equipped with a powerful drilling unit and a modern Hypertherm XPR 300 plasma flame cutting unit. The equipment is designed for plate sizes of plate width: minimum 200 mm, maximum 2500 mm; plate length: minimum 2500 mm and maximum 6000 mm.
The powerful drilling unit is equipped with an 8-slot tool changer for quick tool change. The 15 kW drilling unit is designed with high torque and high speed up to 7000 rpm for drilling with carbide tools such as Nenok solid carbide drills, Kennametal KSEM drills, Nenok Multiplex interchangeable plate tools as well as for use with HSS coolant channel drills in drill diameters from 10 mm to 40 mm.

Hypertherm XPR 300 plasma cutting system

The modern Hpyertherm XPR 300 cutting system enables a clean cut at material thicknesses from 6 mm to 45 mm, the piercing capacity is max. 50 mm, the cut-off capacity is max. 80 mm. Furthermore, the Hypertherm XPR 300 plasma cutting source is characterized by its reliability and a high availability of wear parts.

For the extraction of the plasma cutting gases, the system is equipped with a powerful extraction system with filter system.

Material clamping of the sheet metal plates

Multiple hydraulic clamping devices move on robust prismatic guide rails and move the heavy sheet metal or flat steel via a roller conveyor to the processing position of the drilling unit, the marking unit or the thermal cutting unit.

Marking of the components

The marking of the finished components can be done both with the imprinting of numbers and figures via the marking unit and with the marking milling a kind of marking (also called scribing). This enables the subsequent assignment of the components and marking of the welding position.

Material unloading and chip transport

In order to maintain a high level of automation, a folding table integrated in the roller track ensures that the finished components are transported away onto the chain conveyor after the flame cutting process. Another chain conveyor positioned on the opposite side ensures the removal of drilling and milling chips.

CNC control and software

The system is programmed using the modern Fanuc CNC control and Mitrol software designed for sheet metal processing.

This used Ficep Tipo G25 LG sheet metal working center is in very good condition.